Asian Journal of Microbiology and Biotechnology

Zhao L, Zhang Z, Song Y, Liu S, Qi Y, Wang X et al.. Mechanical properties and in vitro biodegradation of newly developed porous Zn scaffolds for biomedical applications. Mater Des. 2016;108:136-44.

DOI: 10.1016/j.matdes.2016.06.080

Seyedraoufi ZS, Mirdamadi S. Synthesis, microstructure and mechanical properties of porous Mg-Zn scaffolds. J Mech Behav Biomed Mater. 2013;21:1-8.

DOI: 10.1016/j.jmbbm.2013.01.023

Li H, Peng Q, Li X, Li K, Han Z, Fang D. Microstructures, mechanical and cytocompatibility of degradable Mg–Zn based orthopedic biomaterials. Mater Des. 2014; 58:43-51.

DOI: 10.1016/j.matdes.2014.01.031

Yang H, Wang C, Liu C, Chen H, Wu Y, Han J, et al. Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model. Biomaterials. 2017;145:92-105.

DOI: 10.1016/j.biomaterials.2017.08.022, PMID 28858721.

Vojtěch D, Kubásek J, Serák J, Novák P. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation. Acta Biomater. 2011;7(9): 3515-22.

DOI: 10.1016/j.actbio.2011.05.008, PMID 21621017.

Zhao S, Seitz JM, Eifler R, Maier HJ, Guillory RJ II, Earley EJ, et al. Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat. Mater Sci Eng C. 2017;76:301-12.

DOI: 10.1016/j.msec.2017.02.167

Bowen PK, Guillory RJ II, Shearier ER, Seitz JM, Drelich J, Bocks M, et al.. Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents. Mater Sci Eng C. 2015;56:467-72.

DOI: 10.1016/j.msec.2015.07.022

Drelich AJ, Zhao S, Guillory RJ II, Drelich JW, Goldman J. Long-term surveillance of zinc implant in murine artery: surprisingly steady biocorrosion rate. Acta Biomater. 2017;58: 539-49.

DOI: 10.1016/j.actbio.2017.05.045, PMID 28532901.

Sadighikia S, Abdolhosseinzadeh S, Asgharzadeh H. Powder. Met. 2015;58(1): 61-6.

Azizi A, Haghighi GG. Fabrication of ZAMAK 2 alloys by powder metallurgy process. Int J Adv Manuf Technol. 2015;77(9-12):2059-65.

DOI: 10.1007/s00170-014-6611-z

Gülsoy HÖ, German RM. Production of micro-porous austenitic stainless steel by powder injection molding. Scr Mater. 2008;58(4): 295-8.

DOI: 10.1016/j.scriptamat.2007.10.004

Kafkas F, Ebel T. Metallurgical and mechanical properties of Ti–24Nb–4Zr–8Sn alloy fabricated by metal injection molding. J Alloys Compd. 2014;617:359-66.

DOI: 10.1016/j.jallcom.2014.07.168

Berent K, Pstruś J, Gancarz T. Thermal and microstructure characterization of Zn-Al-Si alloys and chemical reaction with cu substrate during spreading. J Mater Eng Perform. 2016; 25(8):3375-83.

DOI: 10.1007/s11665-016-2074-8

Francis A, Yang Y, Virtanen S, Boccaccini AR. J Mater Sci Mater Med. 2015;26:138.

Kafri A, Ovadia S, Goldman J, Drelich J, Aghion E. The suitability of Zn–1.3%Fe alloy as a biodegradable implant material. Metals. 2018;8(3):153.

DOI: 10.3390/met8030153

Orinakova R, Orinak A, Buckova LM, Giretova M, Medvecky L, Labbanczova E, et al. Int J Electrochem Sci. 2013;8:12451-65.

Wang C, Tonna C, Mei D, Buhagiar J, Zheludkevich ML, Lamaka SV. Biodegradation behaviour of Fe-based alloys in Hanks’ Balanced Salt Solutions: Part II. The evolution of local pH and dissolved oxygen concentration at metal interface. Bioact Mater. 2022;7:412-25.

DOI: 10.1016/j.bioactmat.2021.05.014, PMID 34466742.

Čapek J, Vojtěch D, Oborná A. Microstructural and mechanical properties of biodegradable iron foam prepared by powder metallurgy. Mater Des. 2015;83:468-82.

DOI: 10.1016/j.matdes.2015.06.022

Hermawan H, Dube D, Mantovani D. Adv Mater Res. 2006;15-17:107-12.

Kokubo T, Takadama H. Biomaterials. 2007;27:2907-15.